Adding Reply Archived Topic: It will not be bumped to the top of the forum. Topic Car System Connecetions Membername   Not a member? Sign Up Free (takes 20 seconds) Password   Forgotten your password? Post Font: Verdana Arial Black Georgia Comic Sans Impact   Size: Tiny Normal Big Huge   Color: Default Dark Red Red Orange Brown Green Olive Cyan Blue Dark Blue Indigo Black [ Check Spelling ] [ Post Preview ] [ LiveTags ] FAQ Keyword Search: Post Options Favorites Manager Notify me of new replies to this topic by email Notify me of new replies to this topic by private message Original Post BodomKills Posted at 11:10 am on June 26, 2008 ok i have everything pretty much that i need for a system, its already been hooked up. Recently the power that was going to the amplifier just suddenly stopped. So i checked the fuses, they we're all good. The connections was correct. Does this sound like the power cable from the batter is rather fried or does it sound like a bad connection somewhere...Like i said the amp is not getting power. But my toggle still works. It makes no fucking sense

Replies dancinwitderf Posted at 10:25 am on June 29, 2008 check your remote turn-on wire from the radio that coulda also took a shit which is rather common ..need help let me know im a ex installer JeremyM Posted at 5:06 pm on June 28, 2008 Yeah well....at least I tried. tempoluvver69 Posted at 5:56 pm on June 27, 2008 i doubt he knows what the big 3 is let alone a engine ground... JeremyM Posted at 8:19 am on June 27, 2008 Quote: from tempoluvver69 at 10:24 pm on June 26, 2008 Quote: from JeremyM at 5:12 pm on June 26, 2008 Move your ground to another location. and you should be grounded to the FRAME, not hte body. Also make sure the paint is gone on the ground surface Also, be sure your battery and alternator have good grounds. Although your car may start, run and function...bad grounds for "the big 3" can effect things such as amplifiers, stereos, navigation, DVD players, etc. tempoluvver69 Posted at 7:24 pm on June 26, 2008 Quote: from JeremyM at 5:12 pm on June 26, 2008 Move your ground to another location. and you should be grounded to the FRAME, not hte body. Also make sure the paint is gone on the ground surface JeremyM Posted at 5:12 pm on June 26, 2008 Move your ground to another location. tempoluvver69 Posted at 11:38 am on June 26, 2008 check the fuse on the power cable. If it's good check to see if you are getting 12v at the end of the power cable where it connects to the amp. If you dont have power and the fuse is good the only thing that it could be is your cable is cut somewhere (very very very unlikely) or your battery is dead. You said the power cut out... which is not very clear. If the problem is the amp isnt turning on my guess is the amp ground is bad or you are not getting 11-12v to the remote turn on juanroman1 Posted at 11:18 am on June 26, 2008 maybe its sumthin wit ur battery...did u hook it up urself? All 8 previous replies displayed.