-- Posted by Rippzter at 2:00 pm on Aug. 25, 2008 is it possible to overclock Intel celeron D 360 socket 775LGA 65nm    1.3 core voltage core speed:3458mhz multiplierx26 bus speed:133mhz rated fsb 532mhz cache L2 512kbytes motherboard packard bell RC415 chipset ati -- Posted by The Fantasy at 2:01 pm on Aug. 25, 2008 Yes. Yes it is... -- Posted by Rippzter at 2:02 pm on Aug. 25, 2008 Quote: from The Fantasy at 2:01 pm on Aug. 25, 2008 Yes. Yes it is... GTFO -- Posted by RIMHfire at 2:03 pm on Aug. 25, 2008 Quote: from The Fantasy at 2:01 pm on Aug. 25, 2008 Yes. Yes it is... This.     -- Posted by Rippzter at 2:13 pm on Aug. 25, 2008 how? -- Posted by The Fantasy at 2:29 pm on Aug. 25, 2008 Quote: from Rippzter at 10:02 pm on Aug. 25, 2008 Quote: from The Fantasy at 2:01 pm on Aug. 25, 2008 Yes. Yes it is... GTFO Would you like to submit a better answer? Please, be my guest babes. -- Posted by rand0mguy at 6:55 pm on Aug. 25, 2008 look up on the intel site for cpu utilitys... sometimes u can get programs to crank up the voltage etc... i dont need to overclock my cpu. its fast enuf -- Posted by Rippzter at 9:49 am on Aug. 26, 2008 Quote: from The Fantasy at 2:29 pm on Aug. 25, 2008 Quote: from Rippzter at 10:02 pm on Aug. 25, 2008 Quote: from The Fantasy at 2:01 pm on Aug. 25, 2008 Yes.    Yes it is... GTFO Would you like to submit a better answer? Please, be my guest babes. lol STOP CALLING ME BABES -- Posted by Narfle the Garthok at 9:59 am on Aug. 26, 2008 Quote: from Rippzter at 2:13 pm on Aug. 25, 2008 how? Nvm, read it. -- Posted by Narfle the Garthok at 10:02 am on Aug. 26, 2008 Crank up the voltage in small increments using a intel based cpu utility. If your system becomes unstable, drop the voltage back down. Do not go to far, you will regret it (and overclocking voids any warranties you may have). -- Posted by Neodymie at 8:13 pm on Aug. 26, 2008 Don't mess with voltages! You want to adjust Front side buss speeds. It's usually done from the bios of your mobo. Did you buy your computer from a store or is it custom built? -- Posted by Dickij03 at 7:22 am on Aug. 28, 2008 Quote: from neodymie at 4:13 am on Aug. 27, 2008 Don't mess with voltages!   You want to adjust Front side buss speeds. It's usually done from the bios of your mobo. Did you buy your computer from a store or is it custom built? Nothing wrong with touching the voltages. If this is a prebuilt pc, for example a dell, hp... Don't bother as they would have removed the overclocking functions from the bios. If it isn't then you must begin upping the FSB. Make sure you keep the ratio between cpu and ram so that you aren't pushing your ram over the limit, of you could just unlink them. If your system begins getting unstable try adding more voltage (no more than 1.5v on air cooling). -- Posted by Neodymie at 3:35 pm on Aug. 28, 2008 Quote: from Dickij03 at 7:22 am on Aug. 28, 2008 Quote: from neodymie at 4:13 am on Aug. 27, 2008 Don't mess with voltages!  You want to adjust Front side buss speeds. It's usually done from the bios of your mobo.    Did you buy your computer from a store or is it custom built? Nothing wrong with touching the voltages.   If this is a prebuilt pc, for example a dell, hp... Don't bother as they would have removed the overclocking functions from the bios. If it isn't then you must begin upping the FSB. Make sure you keep the ratio between cpu and ram so that you aren't pushing your ram over the limit, of you could just unlink them. If your system begins getting unstable try adding more voltage (no more than 1.5v on air cooling). If he has no idea how to even do basic overclocking he really shouldn't be messing with voltages at this point. Play around with clock speeds for a little. Do some reading and them maybe move on.